Standard water temperature machine
Standard oil temperature machine
Air-cooled low temperature chiller -10
The maintenance method of mold temperature machine?
Mold temperature machine is also called mold temperature control machine, widely used in plastic molding, light guide plate die-casting, rubber tires, rollers, chemical reaction kettle, bonding, mixing and other industries. In a broad sense, called temperature control equipment, including heating and freezing two aspects of temperature control.
What is the maintenance method of mold temperature machine? Let's understand:
1. After purchasing a new mold temperature machine, please check whether the cooling water is circulating before use to prevent damage to the mold temperature machine due to insufficient cooling water. We must keep the working environment of the mold temperature machine clean and avoid dust, which can greatly extend the service life of the electrical components of the mold temperature machine.
2, the new mold temperature machine, we have to make different maintenance measures according to the use of thermal media. For the medium is water, we should keep the water source clean, so it is not easy to scale, but also to prevent the pipeline blockage. For the medium is oil, we should replace it regularly according to the operating temperature. For those above 200 ℃, we should replace them once a month or two, while for those below 200 ℃, we can replace them once a quarter or so, thus avoiding the problem that the temperature cannot be added.
3. In terms of pipelines, we should judge whether the pipelines are blocked according to the relationship between pumping and pressure. If the pressure is too small, we can take out the heating pipe and clean it with tools, especially the filter cover at the entrance of the system, *** clean it once a month.
4. Regularly check whether the water pump and oil pump of the mold temperature machine are leaking oil. If necessary, the pump shaft seal can also be replaced regularly.
5. On the electrical components, we can replace them in time according to the service life of the components and test them regularly to ensure safety.