Chengfeng Zhizao

Top Searches

Standard water temperature machine

Standard oil temperature machine

Air-cooled low temperature chiller -10


How to choose the oil temperature machine?

Release time:


The oil temperature machine is suitable for auxiliary production of engineering plastic materials and plastic products. The oil temperature machine is pre-adjusted to reach the temperature required for the injection mold, and the first molding is a high-quality product, reducing the raw materials for the trial mold. The mold temperature machine accurately reduces waste, provides production and quality, and is an indispensable tool for the injection molding industry.

Under what circumstances need to use oil temperature machine? Here to understand:




In general, the water temperature machine for the mold is better. However, if the temperature of the mold is required to reach 100-200 degrees, the water temperature machine cannot meet the requirements, because the boiling point of water is 100 degrees. Even if the * * * is sealed, the temperature of the water temperature machine can only reach 180 degrees. At this time, the oil temperature machine can come in handy.

Oil temperature machine, can also be called as oil heater, oil temperature heater, oil circulation temperature controller. The oil temperature machine means a mold temperature machine that uses heat transfer oil as a heat transfer medium. It has its own oil storage tank. When working, heat transfer oil enters the system from the oil storage tank and enters the mold or other equipment requiring temperature control through the circulating pump. After the heat transfer oil comes out of the temperature control equipment, it returns to the system and goes round and round. The heat transfer oil is heated by the heater. When the temperature of the medium detected by the temperature sensing probe reaches the set value, the heater stops working. When the temperature is lower than the set value, the heater starts to work, and when the temperature reaches the set value, it stops working. So cycle back and forth, maintain the normal operation of the machine.