In order to maintain the cooling performance of industrial chillers in a stable state, it is necessary to have very strict requirements on the water source. In the daily use of cold water machine, if the enterprise does not pay enough attention to the good and bad water quality, then the equipment in the process of use, will produce a variety of sudden failure. If the equipment has more failures, it is difficult for the equipment to achieve efficient reduction of space temperature in a short time. The slower the space temperature decreases, the higher the cost of enterprise consumption, which is not conducive to the long-term safe use of chillers.

Any water quality that is too alkaline or too acidic can not meet the needs of industrial chillers, and even lead to irreparable corrosive faults after long-term operation of industrial chillers. Therefore, the use of water-cooled chillers must be combined with the use of high-quality water sources to avoid a large number of equipment failures.

***, soft hardness

Because the water cooled chiller operation needs to use the rich water source, in the case of poor water quality, even if the chiller high efficiency operation, still can not achieve the purpose of rapid cooling in a very short period of time. The longer the equipment runs, the more energy is consumed, which affects the normal use of the cold water machine, and even leads to the increasing cost of using the cold water machine, which is not conducive to the long-term stable operation of the cold water machine. Only the water source with suitable soft hardness can guarantee the stable operation of the chiller. If the water quality is hard, it will affect the operation of the chiller. Especially in the state of high efficiency operation, it is easy to cause various scale problems inside the chiller. After the scale accumulates to a certain extent, it will affect the normal use of the chiller.

Second, water flow

Water flow will also affect the stable operation of water-cooled chillers. If the water flow is too high or too low, it will restrict the operation efficiency of the equipment, and even lead to the cooling performance of the chiller. Within the scope of rationalization, continuously improve the water flow, can increase the safety of the operation of the chiller, while avoiding problems such as small water flow, resulting in the operation of the chiller affected, resulting in irreparable losses. The good and bad water quality of the cold water machine directly affects the stability of the equipment.

The operation of water-cooled chiller is inseparable from the water source, the better the water quality, the lower the probability of the enterprise running the chiller to produce scale, and continue to use the industrial chiller under the premise of eliminating the threat of scale, and the operation fault range of the equipment is effectively reduced. The effect of the chiller running in the high-quality water source is * * *. Due to water quality problems, often lead to different types of industrial chiller failure, Komson water chiller company suggested to improve the water quality of industrial chillers, while maintaining the stability of water flow, can effectively improve the production efficiency of chillers, reduce the failure rate of chillers, reduce the cost of use of enterprises.