Standard water temperature machine
Standard oil temperature machine
Air-cooled low temperature chiller -10
The main application areas of cold water machine
In many areas may be used to cold water machine, the main application areas are:
The cold water machine can be used in the supporting vacuum equipment. Such chillers also meet the needs of high-quality vacuum equipment, such as molecular pumps, small vacuum coating machines, etc.
The use of cold water machine in supporting medical laser equipment. This kind of water chiller unique water treatment characteristics, making it an ideal choice for medical laser equipment supporting laboratory equipment. This series of cold water machine is also widely used in atomic absorption spectrum analyzer, fermentation device, reactor, electrophoresis instrument, etc
Attention must be paid during the use of the cold water machine: first, liquid medium should be added into the tank before use; second, the working power supply should be determined according to the model of the machine; the power supply should be greater than or equal to the total power of the instrument; the power supply must be well grounded; the cold water machine should be placed in a dry and ventilated place, and then the side should be 400mm away from the obstacle; * * * after the cold water machine is used, all switches should be turned off, connect the power plug and suck the liquid in the tank with a suction ball and a leather tube.
The cold water machine can be used to match the experimental condensation equipment. Such as rotary evaporator, distiller, condenser, with temperature control, temperature stability, high condensation efficiency, can effectively improve the recovery rate. At the same time, its fluid purification function can avoid the blockage of the circulation pipe and the growth of microorganisms.
The cold water machine is used in the supporting semiconductor laser equipment. Due to its special structure, semiconductor laser equipment has high requirements for water quality.
The refrigerant (ie refrigerant) absorbs the heat of the cooled material in the evaporator and vaporizes into steam. The compressor continuously extracts the generated steam from the evaporator and compresses it. The compressed high-temperature and high-pressure steam is It is sent to the condenser and then releases heat to the cooling medium (such as water, air, etc.) to condense into a high-pressure liquid, which enters the evaporator after being reduced by the throttling mechanism and vaporizes again, absorb the heat of the object being cooled and cycle in this way. When heating, the refrigerant changes the flow direction of the refrigerant through the four-way valve. The flow direction of the refrigerant is just opposite to that of the cooling. The refrigerant first passes through the evaporator, then returns to the condenser, and returns to the compressor.
Scope of application
Plastic industry: accurate control of various plastic processing mold temperature, shorten the cycle of beer plastic, to ensure the stability of product quality.
Electronics industry: Stabilize the molecular structure of electronic components on the production line, improve the pass rate of electronic components, and apply to the ultrasonic cleaning industry to effectively prevent the volatilization of expensive cleaning agents and the harm caused by volatilization.
Electroplating industry: control plating temperature, increase the density and smoothness of plated parts, shorten the plating cycle, improve production efficiency and improve product quality.
Machinery industry: control the pressure oil temperature of the hydraulic system, stabilize the oil temperature and oil pressure, extend the use time of oil quality, improve the efficiency of mechanical lubrication, and reduce wear.
Construction industry: supply of frozen water for concrete, so that the molecular structure of concrete is suitable for construction purposes, and effectively enhance the hardness and toughness of concrete.
Vacuum coating: control the temperature of the vacuum coating machine to ensure the high quality of the plated parts.
Food industry: used for high-speed cooling after food processing to adapt to packaging requirements. In addition, the temperature of fermented food is controlled.
Pharmaceutical industry: In the pharmaceutical industry, it is mainly used to control the temperature control of fermented drugs. Pharmaceutical companies should make full use of cold water machine equipment, continue to strengthen technological innovation on the basis of giving full play to their advantages, and enhance the cost performance of cold water machines, so as to better serve the pharmaceutical sector.